Beyond for Astigmatism

ABOUT Clearday BEYOND for Astigmatism
Biocompatible Silicone hydrogel lens for reduced patient drop outs due to allergic reaction to silicone materials.

clearday™ BEYOND with AQUAGRIP technology delivers dimensional stability, crisp vision, and a moisture drenched feeling for unsurpassed comfort from the moment it is placed on eye until it is removed.

The Tri-Channel technology delivers a highly breathable lens with high oxygen, ion and water transport performance essential to eye health and comfort.

Novel First Biocompatible silicone hydrogel lens
The Tri-Channel technology of clearday™ BEYOND offers ocular health benefits of a high “oxygen, ion, and water” transmission.

The product features a molecular design intended to mimic human mucosal membranes and reduce allergic reaction to lens material thereby leading to lower drop out rates among users of silicone hydrogel lens.

Tri-Channels technology
Delivers high “Oxygen, lon, and Water” transport essential to maintaining ocular health. The high oxygen permeability of the lens exceeds minimal recommended values essential for corneal health while the high ion transmission feature promotes optimal gliding of lens on cornea. clearday™ BEYOND combines high oxygen transmissibility, low modulus, high water content and the power of AQUAGRIP technology all in one lens. This unparalleled combination of properties safeguards ocular health of patients. Other silicone hydrogel lenses might offer one or two of these properties, but only clearday™ BEYOND offers all four features in one lens.

Ultra Thin and Cornea Contoured Design
Effectively corrects spherical aberration. The advanced feature providestion. The advanced feature provides wearers a superior vision in dim light and on boundary. In fact, the vision corrected by clearday™ BEYOND is wider and clearer than the vision of a normal 20/20 eyes in a dim light!

60% water content
Lens combined with low modulus enhances patient comfort. Some Silicone hydrogel lenses have high oxygen transmission, but with high modulus, sacrificing wearer comfort.

Lens Specification
SPECIFICATIONS – Clearday™ BEYOND

 

Material  40% Filcon II 3, 60% water content
Base Curve
Diameter
8.60 mm and 8.30 mm
14.2 mm and 14.0 mm
Handling Tint Light Blue
UV Blocking Class 2 (UVA + UVB)
Power Range -12.00 to +6.00
0.00 to -6.00     (0.25D steps)
-6.50 to -12.00 (0.50D steps)
+0.25 to +4.00 (0.25D steps)
+4.50 to +6.00 (0.50D steps)
Nominal Centre Thickness 0.06 mm @ -3.00D
Oxygen Permeability
Dk @ 35°C
88 X 10-11 (cm2/s)(mlO2/ml.mm Hg)
Dk/t @ -3.00D 146.67 x 10-9(cm / s)[ml O2 / (ml×mmHg)]
Standard Pack Size 3, 6 lenses

Patient Care Information

cross CORRECTS  REPLACEMENT SCHEDULE  cross UV

Beyond

ABOUT Clearday BEYOND
Biocompatible Silicone hydrogel lens for reduced patient drop outs due to allergic reaction to silicone materials.

clearday™ BEYOND with AQUAGRIP technology delivers dimensional stability, crisp vision, and a moisture drenched feeling for unsurpassed comfort from the moment it is placed on eye until it is removed.

The Tri-Channel technology delivers a highly breathable lens with high oxygen, ion and water transport performance essential to eye health and comfort.

Novel First Biocompatible silicone hydrogel lens
The Tri-Channel technology of clearday™ BEYOND offers ocular health benefits of a high “oxygen, ion, and water” transmission.

The product features a molecular design intended to mimic human mucosal membranes and reduce allergic reaction to lens material thereby leading to lower drop out rates among users of silicone hydrogel lens.

Tri-Channels technology
Delivers high “Oxygen, lon, and Water” transport essential to maintaining ocular health. The high oxygen permeability of the lens exceeds minimal recommended values essential for corneal health while the high ion transmission feature promotes optimal gliding of lens on cornea. clearday™ BEYOND combines high oxygen transmissibility, low modulus, high water content and the power of AQUAGRIP technology all in one lens. This unparalleled combination of properties safeguards ocular health of patients. Other silicone hydrogel lenses might offer one or two of these properties, but only clearday™ BEYOND offers all four features in one lens.

Ultra Thin and Cornea Contoured Design
Effectively corrects spherical aberration. The advanced feature providestion. The advanced feature provides wearers a superior vision in dim light and on boundary. In fact, the vision corrected by clearday™ BEYOND is wider and clearer than the vision of a normal 20/20 eyes in a dim light!

60% water content
Lens combined with low modulus enhances patient comfort. Some Silicone hydrogel lenses have high oxygen transmission, but with high modulus, sacrificing wearer comfort.

Lens Specification
SPECIFICATIONS – Clearday™ BEYOND

 

Material  40% Filcon II 3, 60% water content
Base Curve
Diameter
8.60 mm and 8.30 mm
14.2 mm and 14.0 mm
Handling Tint Light Blue
UV Blocking Class 2 (UVA + UVB)
Power Range -12.00 to +6.00
0.00 to -6.00     (0.25D steps)
-6.50 to -12.00 (0.50D steps)
+0.25 to +4.00 (0.25D steps)
+4.50 to +6.00 (0.50D steps)
Nominal Centre Thickness 0.06 mm @ -3.00D
Oxygen Permeability
Dk @ 35°C
88 X 10-11 (cm2/s)(mlO2/ml.mm Hg)
Dk/t @ -3.00D 146.67 x 10-9(cm / s)[ml O2 / (ml×mmHg)]
Standard Pack Size 3, 6 lenses

Patient Care Information

cross CORRECTS  REPLACEMENT SCHEDULE  cross UV

Beyond 1-day

ABOUT Clearday BEYOND 1-Day
Biocompatible Silicone hydrogel lens for reduced patient drop outs due to allergic reaction to silicone materials.

clearday™ BEYOND with AQUAGRIP technology delivers dimensional stability, crisp vision, and a moisture drenched feeling for unsurpassed comfort from the moment it is placed on eye until it is removed.

The Tri-Channel technology delivers a highly breathable lens with high oxygen, ion and water transport performance essential to eye health and comfort.

Novel First Biocompatible silicone hydrogel lens
The Tri-Channel technology of clearday™ BEYOND offers ocular health benefits of a high “oxygen, ion, and water” transmission.

The product features a molecular design intended to mimic human mucosal membranes and reduce allergic reaction to lens material thereby leading to lower drop out rates among users of silicone hydrogel lens.

Tri-Channels technology
Delivers high “Oxygen, lon, and Water” transport essential to maintaining ocular health. The high oxygen permeability of the lens exceeds minimal recommended values essential for corneal health while the high ion transmission feature promotes optimal gliding of lens on cornea. clearday™ BEYOND combines high oxygen transmissibility, low modulus, high water content and the power of AQUAGRIP technology all in one lens. This unparalleled combination of properties safeguards ocular health of patients. Other silicone hydrogel lenses might offer one or two of these properties, but only clearday™ BEYOND offers all four features in one lens.

Ultra Thin and Cornea Contoured Design
Effectively corrects spherical aberration. The advanced feature providestion. The advanced feature provides wearers a superior vision in dim light and on boundary. In fact, the vision corrected by clearday™ BEYOND is wider and clearer than the vision of a normal 20/20 eyes in a dim light!

60% water content
Lens combined with low modulus enhances patient comfort. Some Silicone hydrogel lenses have high oxygen transmission, but with high modulus, sacrificing wearer comfort.

Lens Specification
SPECIFICATIONS – Clearday™ BEYOND 1-day

 

Material  40% Filcon II 3, 60% water content
Base Curve
Diameter
8.60 mm and 8.30 mm
14.2 mm and 14.0 mm
Handling Tint Light Blue
UV Blocking Class 2 (UVA + UVB)
Power Range -12.00 to +6.00
0.00 to -6.00     (0.25D steps)
-6.50 to -12.00 (0.50D steps)
+0.25 to +4.00 (0.25D steps)
+4.50 to +6.00 (0.50D steps)
Nominal Centre Thickness 0.06 mm @ -3.00D
Oxygen Permeability
Dk @ 35°C
88 X 10-11 (cm2/s)(mlO2/ml.mm Hg)
Dk/t @ -3.00D 146.67 x 10-9(cm / s)[ml O2 / (ml×mmHg)]
Standard Pack Size 3, 6 lenses

Patient Care Information

cross CORRECTS   one-number DAILY DISPOSABLE   cross UV

Clearcolor

clearcolor-text

clearcolor-viewty
cc-lens-viewty
clearcolor-natural
cc-lens-natural
clearcolor-vibrant
cc-lens-vibrant
clearcolor-mystic
cc-lens-mystic
clearcolor-breeze
cc-lens-breeze
clearcolor-phantom
cc-lens-phantom

Lens Specification
SPECIFICATIONS – clearcolor®
Material 62% polymacon, 38% water content
Base Curve
Diameter
8.00 ~ 9.50 mm
12.80 ~ 14.80 mm
Power Range 0.00 to +25.00 (0.25D steps)
0.00 to -25.00 (0.25D steps)
Nominal Centre Thickness 0.03 to 0.30 mm
Oxygen Permeability Dk @ 35°C 8.95 X 1011 (cm2/s)(mlO2/ml.mm Hg)
Packing type Box – 2 lenses

 

Patient Care Information

 

cross CORRECTS  REPLACEMENT SCHEDULE  cross UV

Clearcolor 1-day

ABOUT Clearcolor® 1-day
ClearIab’s innovative engineers, scientists and clinical experts have successfully combined the ocular benefits of our biocompatible AQUAGRIP technology – with the clinical simplicity of single-use lenses to create the first biocompatible daily disposable lens – clearcolor® 1-day

Water balance ratio of 5.5: first in color lens for eye health
AQUAGRIP™ Technology for “Water Envelope”, encasing the lens, makes water molecules bound tightly to the lens material in order to keep a dimensional stability for an accurate vision and unsurpassed comfort for all day long.

Sandwich-color Technology
True sandwich technology offering a healthy and comfortable eyes because circle line does not contact the eye.

Natural harmony to meet eye color
clearcolor® 1-day Depending on the eye color, the circle line in soft black color is shown as Brown tone or Black tone.

Lens Specification
SPECIFICATIONS – clearcolor® 1-day
Material  42% Hioxifilcon A, 58% water content
Base Curve
Diameter
8.60 mm
14.20 mm
Graphic Color Black, Brown, Blue, Green, Gray
Power Range -10.00 to +6.00
+0.25 to +6.00 (0.25D steps)
0.00 to -6.00 (0.25D steps)
-6.50 to -10.00 (0.50D steps)
Nominal Centre Thickness 0.090 mm @ -3.00D
Oxygen Permeability
Dk @ 35°C
25.38 X 1011 (cm2/s)(mlO2/ml.mm Hg)
Standard Pack Size 10, 30 lenses

Patient Care Information

cross CORRECTS  REPLACEMENT SCHEDULE  cross UV

Clear 58®

Clear 58®

ABOUT CLEAR58®

clear58® has been designed to bring the benefit of Clearlab’s innovative Truform® edge to wearers of the world’s most popular lens material – etafilcon.

Wearer benefits of the Truform® edge include optimum movement, comfort and handling. The thin design of the clear58® also provides positive benefits in ocular health.

 

ENHANCING PERFORMANCE THROUGH INNOVATIVE LENS DESIGN

clear58® and the advantages ofTruform® thin edge were extensively tested in a range of studies on a frequent replacement basis in Australia and UK .

TRUform® EDGE DESIGN

  • Results in smoother and thinner geometry
  • Optimum movement with superior comfort
  • Higher acceptance rate from wearers

 

POSITIVE WEARER PREFERENCE

  • Switching wearers to clear58® gives high patient satisfaction
  • Clinical data showed equivalence to other market leading etafilcon lenses in terms of vision, handling, fit and comfort

Clinical preference: more than 60% of wearers found clear58® lenses to be equal to or better than lenses of other leading brands.

 

Lens Specification
SPECIFICATIONS – Clear58®
Material  42% etafilcon A, 58% water content
Base Curve (Minus)
Diameter   (Minus)

Base Curve (Plus)
Diameter   (Plus)

8.70   mm (flat)          8.30 mm (steep)
14.00 mm                  14.00 mm

8.70   mm (flat)
14.50 mm

Handling Tint Light Blue
UV Blocking UVA + UVB
Power Range -10.00 to +6.00
0.00 to -6.00    (0.25D steps)
-6.50 to -10.00 (0.50D steps)
+0.25 to +4.00 (0.25D steps)
+4.50 to +6.00 (0.50D steps)
Nominal Centre Thickness 0.101mm @ -3.00D
Oxygen Permeability
Dk @ 35°C
21.83 X 10-11 (cm2/s)(mlO2/ml.mm Hg)
Standard Pack Size 6 lenses

Patient Care Information

LENS SPECIFICATION
cross CORRECTS  REPLACEMENT SCHEDULE cross UV

Clear 55A® / Clear 55A®UV

Clear 55A® / Clear 55A®UV

ABOUT CLEAR55A®

clear55A® was designed to provide an optimal balance of handling, comfort and vision. The lens has been enhanced with aberration correcting aspheric optics to optimize the overall visual experience and encompasses a design philosophy that addresses the wearer’s handling and comfort needs.

For healthy active lifestyle clear55A®uv provides UV protection.

OVERALL BALANCE

The performance of clear55A® has been extensively  tested through a range of clinical studies including a 120 patient double masked crossover study where it was compared with other leading brands.

OPTIMIZING VISUAL ACUITY THROUGH INNOVATIVE ASPHERIC DESIGN

The visual acuity of clear55A® is optimized over the power range and the incorporation of aberration correcting aspherics provides wearers with maximum contrast sensitivity, particularly in low illumination where it is needed most.

OPTIMIZING WEARER COMFORT, FIT AND HANDLING

The peripheral and edge design of clear55A® provides a balance between excellent comfort and assured handling. The comfort and handling of clear55A® was preferred by wearers compared with other leading brands.

The larger diameter of clear55A® assists in centering the lens on the eye and ensures a wide latitude of fit over a wide range of corneal sizes, providing practitioners with a versatile fitting lens.

 

POSITIVE WEARER PREFERENCE

The overall balance of clear55A® was appreciated by wearers who showed an overwhelming preference for the lens compared to other leading brands. The lens was preferred more often for its overall comfort and handling.

 

Lens Specification
SPECIFICATIONS – Clear55A® | Clear55A®UV
Material  45% methafilcon A, 55% water content
Base Curve
Diameter
8.70 mm
14.50 mm
Handling Tint Light Blue
*UV Blocking UVA + UVB
Power Range -12.00 to +6.00
0.00 to -6.00    (0.25D steps)
-6.50 to -12.00 (0.50D steps)
+0.25 to +4.00 (0.25D steps)
+4.50 to +6.00 (0.50D steps)
Nominal
Centre Thickness
clear55A®        0.099 mm @ -3.00D
clear55A®uv    0.077 mm @ -3.00D
Oxygen Permeability
Dk @ 35°C
clear55A®        23.43 X 1011 (cm2/s)(mlO2/ml.mm Hg)
clear55A®uv    24.26 X 1011 (cm2/s)(mlO2/ml.mm Hg)
Standard Pack Size 6 lenses

Patient Care Information

cross CORRECTS  REPLACEMENT SCHEDULE cross UV

Clear 38®

Clear 38®

ABOUT CLEAR38®

The clear38® contact lens has been enhanced with a unique combination of blended anterior surface geometry and our tangential back surface design in order to provide a comfortable and trouble free fit over a large range of eyes.

Higher powers are kept to a minimum overall thickness thus maximizing comfort and oxygen transmission to the cornea.

Sold successfully throughout the world, the clear38® lens epitomizes clearlab‘s attention to design detail throughout its product portfolio.

MODERN DESIGN FOR A TRADITIONAL MATERIAL

The edge is a blended low edge design, matched to the tangential back surface to ensure that the clear38® provides comfort that is unparalleled for a traditional material.

The material choice and design of clear38® creates a contact lens that retains its handling properties without sacrificing fit compliance. The modulus of our material is a balance of these two factors and provides a lens which remains comfortable throughout all day wear.

The raw materials used to make this lens are of the utmost purity and our polymerization process ensures that the lens will retain its purity throughout the patient’s wearing schedule.

Lens Specification
SPECIFICATIONS – Clear38®
Material  62% polymacon, 38% water content
Base Curve
Diameter
8.60 mm
14.00 mm
Handling Tint Light Blue
UV Blocking UVA + UVB
Power Range -12.00 to +6.00
0.00 to -6.00     (0.25D steps)
-6.50 to -12.00 (0.50D steps)
+0.25 to +4.00 (0.25D steps)
+4.50 to +6.00 (0.50D steps)
Nominal Centre Thickness 0.097 mm @ -3.00D
Oxygen Permeability
Dk @ 35°C
12.92 X 1011 (cm2/s)(mlO2/ml.mm Hg)
Standard Pack Size 6 lenses

 

Patient Care Information

cross CORRECTS  REPLACEMENT SCHEDULE cross UV

Clear Allday®T

ABOUT CLEARALL-DAY

Clearlab’s innovative engineers, scientists and clinical experts have successfully combined the ocular benefits of a biocompatible material – AQUAGRIP™- with the clinical simplicity of a unique aspheric disposable lens – clearall-dayT™.

AQUAGRIP™ is achieved through synthesising the compatibility properties of mucin, the body’s natural wetting substance.

Wearers benefit from longer, more comfortable wearing times providing them with a truly comfortable all day lens.

INNOVATION IN ACTION

Over a quarter of all contact lens wearers suffer from astigmatism. clearlab® is bringing the benefits of long-lasting comfort, extended wearing times and improved ocular health to wearers with astigmatism through the introduction of clearall-dayT

ADVANCED TORIC DESIGN

clearall-dayT™ provides astigmatic wearers the benefits of AQUAGRIP™ in a frequent replacement lens – extending the prescribing modalities for practitioners. Our  patented unique dynamically stabilised design provides excellent performance in vision and comfort to wearers.

The design uses delta profiles to orient the lens with the eye’s blinking mechanism. This provides a slimmer profile lens than the thick prism ballast of conventional toric designs. This slim profile provides rapid and accurate on eye orientation, and aids oxygen transfer to the cornea, leading to clearer vision and better end of day comfort and improved ocular health.

ASPHERIC OPTICS

Incorporating advanced aspheric optics into the design provides enhanced acuity and an increased depth of focus (DOF effect) at the retina. This allows lens fitting to a wider range of cylinder prescriptions than conventional torics, making lens fitting easier with a greater first time success.

Lens Specification
SPECIFICATIONS – Clearall-dayT™
Material  43% hioxifilcon A, 57% water content
Base Curve
Diameter
8.70 mm
14.40 mm
Handling Tint Light Blue
Power Range -8.00 to +4.00
0.00 to -6.00    (0.25D steps)
-6.50 to -8.00   (0.50D steps)
+0.25 to +4.00 (0.25D steps)
Cylinder Power -1.00D, -1.75D
Axis 10o, 20o, 80o, 90o, 100o, 160o, 170o, 180o
Axis Marks Single line indication at 6 o’clock
Nominal Centre Thickness 0.099mm @ -3.00 D
Oxygen Permeability
Dk @ 35°C
24.45 X 1011 (cm2/s)(mlO2/ml.mm Hg)
Standard Pack Size 6 lenses

Patient Care Information

cross CORRECTS  REPLACEMENT SCHEDULE  cross UV

Clear Allday®

ABOUT CLEARALL-DAY®

Clearlab’s innovative engineers, scientists and clinical experts have successfully combined the ocular benefits of a biocompatible material – AQUAGRIP™- with the clinical simplicity of a unique aspheric disposable lens – clearall-day™.

AQUAGRIP™ is achieved through synthesising the compatibility properties of mucin, the body’s natural wetting substance.

Wearers benefit from longer, more comfortable wearing times providing them with a truly comfortable all day lens.

ENHANCING OCULAR PERFORMANCE

Since its inception, clearlab® has had and intense focus on designing a contact lens that is superior to the world’s leading biocompatible frequent replacement lens. We adressed this challenge by designing a biocompatible lens with optimized material that exhibited enhanced vision, improved durability and convenient handling. The result is clearall-day® – the unique aspheric biocompatible frequent
replacement lens from clearlab®.

ASPHERIC OPTICS

Our biocompatible clearall-day® lens has been enhanced with aberration correcting aspheric optics to optimize the overall visual experience. Our optics incorporate innovative wavefront design
and technology.

 

With aspheric optics, visual acuity is optimized over the power range and the optical design is tailored to provide maximum contrast sensitivity particularly under low illumination. The combination of aberration correcting aspheric optics, superb water retention, and longer wearing times make clearall-day® a truly unique lens.

 

 

Lens Specification
SPECIFICATIONS – Clearall-day®
Material  43% hioxifilcon A, 57% water content
Base Curve
Diameter
8.6 mm
14.2 mm
Handling Tint Light Blue
Power Range -12.00 to +6.00
0.00 to -6.00    (0.25D steps)
-6.50 to -12.00 (0.50D steps)
+0.25 to +4.00 (0.25D steps)
+4.50 to +6.00 (0.50D steps)
Nominal Centre Thickness 0.084mm @ -3.00D
Oxygen Permeability
Dk @ 35°C
25.29 X 1011 (cm2/s)(mlO2/ml.mm Hg)
Standard Pack Size 6 lenses

 

Patient Care Information

 

cross CORRECTS  REPLACEMENT SCHEDULE  cross UV